Seat pad, curved

94,33

Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!

Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.

Compatible Parts:

Tyga Tail cowling: BPFT-9002, BPFT-9012, BPFT-9102 and BPFT-9112

Seat set race carbon GP-T, Honda NSR250 MC28

1.516,92

Kit, Seat Set, Carbon (Race), MC28 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.

Note there are 4 MC28 GT-T seat cowling kits to choose from:

BPFS-0133 Street GRP

BPFS-0134 Race GRP

BPFS-0135 Street Carbon

BPFS-0136 Race Carbon

Note, some pictures below show the street version with taillight and turn signals which are not included in this kit.

Seat set race GRP GP-T, Honda NSR250 MC28

879,21

Kit, Seat Set, GRP (Race), MC28 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Street Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.

Note there are 4 MC28 GT-T seat cowling kits to choose from:

BPFS-0133 Street GRP

BPFS-0134 Race GRP

BPFS-0135 Street Carbon

BPFS-0136 Race Carbon

Note, some pictures below show the street version with taillight and turn signals which are not included in this kit.

Seat set race, Honda NSR250 MC28

582,25

This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.

We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

Seat set street carbon GP-T, Honda NSR250 MC28

1.740,72

Kit, Seat Set, Carbon (Street), MC28 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Street Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.

Note there are 4 MC28 GT-T seat cowling kits to choose from:

BPFS-0133 Street GRP

BPFS-0134 Race GRP

BPFS-0135 Street Carbon

BPFS-0136 Race Carbon

Seat set street GRP GP-T, Honda NSR250 MC28

1.024,30

Kit, Seat Set, GRP (Street), MC28 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Street Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.

Note there are 4 MC28 GT-T seat cowling kits to choose from:

BPFS-0133 Street GRP

BPFS-0134 Race GRP

BPFS-0135 Street Carbon

BPFS-0136 Race Carbon

Seat set street, Honda NSR250 MC28

736,66

This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.

We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

Seat set with carbon race, Honda NSR250 MC28

652,50

This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.

We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

Seat set with carbon street, Honda NSR250 MC28

783,60

This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.

We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

Sub frame aluminium GP-T, Honda NSR250 MC21/MC28

237,69

Subframe, Aluminium, NSR250 GP-T

This lightweight aluminium subframe weighs lessthan 1.2 kg and replaces the stock item when used as part of the NSR250 GP-T seatl kit. Essential for mounting the seat cowl, this component is supplied with all brackets and mounting points to substitute this for the OEM Honda item. Composed of extrusions and CNC machined sections, handwelded together by craftsman, this subframe is then blasted and anodized for a tough and attractive finish. Supplied with a regulator/rectifier stay as well as cable ties for securing the wiring.

Compatible Parts:

Use with seat cowling kits

BPFS-0128, 0129, 0130, 0131, 0132, 0133, 0134, 0135 and 0136

Suzuka style spotlight,

36,58

This unit is supplied with mounting hardware and loom to illuminate on high beam. The beam is very bright. No additional lighting relay is necessary.

Compatible Parts:

Tyga Upper Cowlings: BPFU-0008, BPFU-0010

Mostrando 85–96 de 121 resultados