Section “final” stainless exhaust, Honda MSX125SF GROM 2016 –

79,71

Section, Final, Stainless, MSX125SF Grom, suitable for our high level systems EXPS-0066 and EXPS-0067.

For EXPS-0041, EXPS-0042, EXPS-0052 and EXPS-0065. please see EXPT-0037

Note, this section moves the silencer to a more rearward position and is suitable for the second generation (MSX125SF) Grom when used with stay BPSY-0176. Not suitable for first generation MSX125 Grom.

Set full race system “under belly” with long stainless silencer with carbon cap, Honda MSX125SF GROM

581,83

Set, Pipe, Full System, Underbelly, MSX125 Grom, Carbon Oval/Carbon End Cap, Long

This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (DB killer included)

Performance and Dynograph

The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0064) with no other changes to the stock bike.

A useful increase in peak power and further gains could probably be had with remapping etc.

Similar Products:

Please also see:

EXPS-0068 Stainless, Underbelly, with short silencer

Set full race system “under belly” with short stainless silencer with carbon cap, Honda MSX125SF GROM

581,83

.Set, Pipe, Full System, Underbelly, MSX125 Grom, Carbon Oval/Carbon End Cap, Short

This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! ( A db killer is included)

Performance and Dynograph

The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0064) with no other changes to the stock bike.

A useful increase in peak power and further gains could probably be had with remapping etc.

Similar Products:

Please also see:

EXPS-0064 Stainless, Underbelly, with long silencer

HRC sticker 120mm (type 4)

6,70

Adhesivo HRC original (120 mm)

Este producto es una pegatina original Honda HRC OEM. Muy alta calidad. Excelentes tintas e impresión con adhesivo fuerte, por lo que no es necesario aplicar una capa transparente. El tamaño es aprox. 120 milímetros. X 40 mm.

Set full race system”high level” with carbon silencer with carbon cap, Honda MSX125SF GROM

409,00

Set, Pipe, Full Race System, High Level, MSX125SF Grom, Carbon Oval/Carbon End Cap. Second Generation.

This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!

Feel free to request this product with no TYGA logo. We understand not everyone wants their bike to be covered with graphcs and we won't be offended. Simply put in the comment box with your order: 'Please supply with no TYGA logo'. Just let us know your requirements; we want to provide the best possible product for your application

Performance and Dynograph

The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043)

A useful gain all through the range, increasing as the revs rise up to maximum.

Similar Products:

Please also see:

EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom

EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom

Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system

Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.

Set, Pipe, Full Race System, High Level, MSX125 2021-, Stainless Oval/Carbon End Cap

686,78

Set, Pipe, Full Race System, High Level, GROM 2021-, Carbon Oval/Carbon End Cap

This race exhaust has been specifically developed for the 2021-22 Grom to maximize performance and looks. The high level system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected.

The silencer is constructed using a carbon sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike.


All necessary stays and hardware are provided for fitting and no bodywork modifications are necessary.

 

See the following for other similar TYGA Performance exhaust systems for the Grom

  • EXPS-0145: Set, Pipe, Full Race System, High Level, GROM 2021-, Carbon Oval/Carbon End Cap
  • EXPS-0146: Set, Pipe, Full Race System, High Level, GROM 2021-, Stainless Oval/Carbon End Cap
  • EXPS-0147: Set, Pipe, Full Race System, High Level, GROM 2021-, Moto Maggot
  • EXPS-0149: Set, Pipe, Twin Exit System, High Level, GROM 2021-, Stainless Oval/Carbon End Cap
  • EXPS-0150: Set, Pipe, Twin Exit System, High Level, GROM 2021-, Moto Maggot

Set full race system”high level” with maggot silencer, Honda MSX125SF GROM

495,54

Set, Pipe, Full Race System, High Level, MSX125SF Grom, Moto Maggot. Second Generation.

This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!

Feel free to request this product with no TYGA logo. We understand not everyone wants their bike to be covered with graphcs and we won't be offended. Simply put in the comment box with your order: 'Please supply with no TYGA logo'. Just let us know your requirements; we want to provide the best possible product for your application

Performance and Dynograph

The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043). Similar power would be expected with the Maggot system EXPS-0065

A useful gain all through the range, increasing as the revs rise up to maximum.

Similar Products:

Please also see:

EXPS-0066 Carbon Oval High level System for 2016 MSX125SF second generation Grom

EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom

Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system

Set full race system”high level” with stainless silencer with carbon cap, Honda MSX125SF GROM

593,49

Set, Pipe, Full Race System, High Level, MSX125SF Grom, Stainless Oval/Carbon End Cap. Second Generation.

This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!

Feel free to request this product with no TYGA logo. We understand not everyone wants their bike to be covered with graphcs and we won't be offended. Simply put in the comment box with your order: 'Please supply with no TYGA logo'. Just let us know your requirements; we want to provide the best possible product for your application

Performance and Dynograph

The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043)

A useful gain all through the range, increasing as the revs rise up to maximum.

Similar Products:

Please also see:

EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom

EXPS-0066 Carbon Oval High level System for 2016 MSX125SF second generation Grom

Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system.

Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.

Mostrando 1–12 de 21 resultados