Piezas de carbono Honda NSR250 MC28

ALETA DE TIBURÓN para basculante tyga CARBONO

54,99

aleta de tiburón de carbono Esta resistente aleta de tiburón de carbono está diseñada para caber en la parte inferior de la mayoría de los basculantes y se suministra con accesorios de montaje. Dependiendo del diseño, el propio brazo oscilante se puede perforar y roscar (para el modelo de yeso) o en la sección de caja, luego se puede perforar y las tuercas de remache suministradas en el kit se pueden instalar para hacer una instalación profesional y sin problemas.

Carbon fairing set street GP-T, Honda NSR250 MC21/MC28

1.499,00

Kit, Fairing Set, Carbon, (Street), NSR250 GP-T

This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NSR250. As well as bringing the NSR250 up to date, it also offers huge weight saving and easy fitment and removal. Similar to a GP bike, the fairing is held on by R clips and nylon bungs for quick release. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.

Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.

As well as this fairing BPFS-0138 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0137

* A clear screen is provided unless you specify tinted in the comment box at check out.

** We recommend trial fitting and making and minor adjustments before painting

Carbon fairing stay side 77mm (pair), Honda NSR250 MC21/MC28

75,00

Fairing Stay, Side, Pair, Carbon

Designed to replaced fixed side stays these lightweight carbon fiber stays are supplied with nylon bungs and ‘R’ clips, for quick release. This product can also be used with many race fairings such as the TYGA Honda RSW and GP250 style or similar applications. See drawing for dimensions. Also see similar product BPSY-0143 Assy.

Dimensions:

BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.

BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.

Compatible products:

TYGA upper cowlings, BPFU-0005, BPFU-9005, BPFU-9014

Carbon fairing stay side 87mm (pair), universal

77,91

Fairing Stay, Side, Pair, Carbon, NSR250, GP-T, Assy.

Designed specifically for the NSR250 GP-T fairing, these side stays fit to the frame in the same position as the steel Honda stays. Made from lightweight carbon fiber with nylon bungs and 'R' clips, they are longer than stock and provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or similar application. See drawing for dimensions. Also see similar product BPSY-0144 Assy.

Dimensions:

BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.

BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.

Compatible products:

TYGA upper cowlings, BPFU-9033 and BPCU-9033.

Carbon front break reservoir stay, Honda NSR250

35,01

Replacement for tired the stock front brake resevoir stay. This trick carbon stay can be used as a direct replacement for the heavy steel one on the NSR250. It weighs about 25% of the original and as well as being stiff and strong, looks like it belongs on a GP bike.

Beautiful, perfect fitment and give your bike that HRC look.

Carbon front fender rsw style, Honda MC18/MC19/MC21/MC22/MC28

170,83

This is the carbon version of our RSW front fender for enhanced looks, strength and light weight. Gives the appearance of a modern front end with inverted forks and fits using the original fasteners. This front fender is suitable for many Honda sports bike models such as:

all model NSR250s, MC18~28

MC19 and MC22 CBR250RR

CB400SF Super Four

Honda Bros/Hawk 400/650. (needs 110/70 section tyre fitted)

This product will not fit the NC23, NC29 CBR400RR, NC30. For these models, use BPCF-9002, for NC35, use BPCF-9005

Carbon generator/sprocket cover, Honda NSR250 MC18/MC21/MC28

208,24

Generator/Front Sprocket Cover NSR250

This lightweight carbon component will make your engine look like it belongs in the GP paddock!Complete with all mounting holes to install speedometer drive and cable guide for side stand switch.

Important, this products re-uses the stock engine case guard from the plastic cover.

Carbon kill switch cover, Honda

23,68

This cover fits on the kill switch to prevent accidental switching off of the engine in race situations. As used in Moto2 by Team SAG.

Attach with small amount of epoxy or silicone adhesive.

Will fit on many Honda’s and other brands motorcycles.

Mostrando 1–12 de 37 resultados

Contacta con nosotros

No siempre estamos disponibles. Sin embargo, nos puede enviar un email y nos pondremos en contacto contigo lo antes posible.

¿No es legible? Cambia el texto. captcha txt
0