Piezas universales Tyga

Bar End Weights, Pair, CBR125/150,

21,24

Bar End Weights, Pair, CBR125/150,

Suitable for 2011 CBR 125 and 150 models. Replace the stock ones with these stylish replacements.

Warning; you will need an impact driver to remove the existing items on your bike.

Bolt, front brake rotor mounting, Honda

2,42

Front brake mounting bolt. Bolt, M6 thread with a dome head and 6 mm. Allen key fitting

Replace those nasty corroded bolts with these Honda OEM shiny new ones, your bike deserves it! Suitable for most Honda models including:

CBR250R

MC18

MC21

MC22

MC28

NC23

NC30

NC35

RC30

RC40

RC45

etc.

Carbon fairing stay side 77mm (pair), Honda NSR250 MC21/MC28

69,01

Fairing Stay, Side, Pair, Carbon

Designed to replaced fixed side stays these lightweight carbon fiber stays are supplied with nylon bungs and ‘R’ clips, for quick release. This product can also be used with many race fairings such as the TYGA Honda RSW and GP250 style or similar applications. See drawing for dimensions. Also see similar product BPSY-0143 Assy.

Dimensions:

BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.

BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.

Compatible products:

TYGA upper cowlings, BPFU-0005, BPFU-9005, BPFU-9014

Carbon fairing stay side 87mm (pair), universal

69,01

Fairing Stay, Side, Pair, Carbon, NSR250, GP-T, Assy.

Designed specifically for the NSR250 GP-T fairing, these side stays fit to the frame in the same position as the steel Honda stays. Made from lightweight carbon fiber with nylon bungs and 'R' clips, they are longer than stock and provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or similar application. See drawing for dimensions. Also see similar product BPSY-0144 Assy.

Dimensions:

BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.

BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.

Compatible products:

TYGA upper cowlings, BPFU-9033 and BPCU-9033.

Carbon parking brake

39,49

Carbon parking brake (alg-10177)

The TYGA Parking Brake is simple but effective and fits pretty much every motorcycle with a hydraulic front brake system, both on and off road. Made from stylish and strong carbon fiber it locks the bike and prevents the bike rolling forward or back while in a parked position. Slip the TYGA Parking Brake into position over the throttle and front brake lever and it will lock the front wheel solid. Useful for a variety of situations:

-When parking on uneven ground, gives peace of mind that the bike will not roll off sidestand

-Useful for locking the motorcycle front wheel during transportation of the motorcycle in or on another vehicle

-Handy for bleeding air out of the front brake system of the bike. Applied over night it will help to squeeze the air to the bleed nipples and reservoir etc.

Don’t worry, it is impossible to forget to remove before riding because it covers the throttle so it has this inherent built in safety feature.

It is one of those things that you probably thought you never needed but once you have this TYGA Parking Brake, you’ll be surpised how handy it is!

Designed by Zanti factory

Castle nut tool, Honda MC21 NC30 NC35

29,95

Tool to loosen/tighten the castle lock nut that secures the swingarm adjuster bolt on the NSR250 MC21. Also used for the castle locknuts on the adjusters that hold the NC30/35 engine in position. No more need for a hammer and drift, do the job properly!

Does not fit the swing arm lock nut on MC28 or NC30/35

Mostrando 1–12 de 39 resultados

Contacta con nosotros

No siempre estamos disponibles. Sin embargo, nos puede enviar un email y nos pondremos en contacto contigo lo antes posible.

¿No es legible? Cambia el texto. captcha txt
0

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.

ACEPTAR
Aviso de cookies