Escapes Tyga Aprilia RS125

Collar manifold, Aprilia RS125

23,60

This is a replacement part. When ordering chambers, this item is included in the price and you do not need to order this parts separately.

Compatible with the following TYGA system:

EXCS-0019

Exhaust set stainless steel, Aprilia RS125

284,35 278,00

.Set, Exhaust Chamber, Stainless Steel, Aprilia RS-125

Cone welded stainless steel exhaust, for your RS125 performance and look!

The TYGA Performance Aprilia RS-125 Stainless Steel chamber, when used with a TYGA silencer, offers huge saving in weight and increase in power over the stock system. The handcrafted cones are TIG welded together to show the weld rings to maximum affect; this system is a must for the Aprilia RS-125 owner and fits all versions up to and including 2011

This products is the chamber set only and to complete the full replacement exhaust system for your Aprilia RS125 you will need to order a silencer too.

Included in this product:

A.)1 X chamber set (EXCS-0013 or EXCS-0019). When you order this product, you will receive included in the chamber set:

1 X chamber

1 X manifolds with flange and ‘o’ring

2 X manifold to chamber springs

1 X clamp and mounting hardware

Not included in this product is the silencer. Please order separately:

B.)1 X silencer (EXSL-0003, EXSL-0004 OR EXSL-0005) of your choice. Each silencer is provided with mounting hardware and will have a badge attached on the correct side for this system when ordered at the same time.

Exhaust spring 2 stroke

2,90

Replacement expansion chamber securing spring. Fits all TYGA two stroke systems.

This is a replacement part. When ordering chambers (EXCS-****), this item is included in the price and you do not need to order this parts separately.

Flange, Silencer mounting (mild steel) 2 stroke

8,03

This Silencer Mounting Flange, made in mild steel, allows for fitment of all TYGA silencers to just about any two stroke expansion chamber. Simply cut off the original mount flange and weld on the TYGA mount flange.

26.5mm inside diameter. Some expansion chamber systems may require a reducing sleeve, or modification to the mount flange for the perfect fit.

This is a replacement part. When ordering chambers (EXCS-****), this item is included in the price and you do not need to order this parts separately.

Flange, Silencer mounting (stainless steel) 2 stroke

10,04

This Silencer Mounting Flange allows for fitment of all TYGA silencers to any stainless steel two stroke expansion chamber. Simply cut off the original mount flange and weld on the TYGA mount flange.

26.5mm inside diameter. Some expansion chamber systems may require a reducing sleeve, or modfication to the mount flange for the perfect fit.

Silencer aluminium “SHORTY” 2 stroke stainless endcap

69,88

This shorty (55mm shorter than our other 2 stroke silencers) aluminium two stroke silencer offers the same excellent value for money that our silencers always have but now with improved build quality and precision

– CNC machined mounting end cap with 3 holes precision drilled for mounting to exhaust chamber flange

– stainless steel exit end cap and nozzle

– cartridge glass wool insulation for greater longevity

– lightweight: weighs just 0.6 kg

– tough anodised body finish for enhanced looks and weather resistance

– Silencer is designed with a built-in sealing ‘O’ ring and stainless steel bolts and washers are provided.

“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”

Compatible Parts:

All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!

Other Alternative Products:

EXSL-0065 Shorty Carbon

EXSL-0066 Shorty Carbon/Kevlar

EXSL-9005 Aluminium

EXSL-0003 Carbon

EXSL-0004 Carbon/Kevlar

Silencer aluminium 2 stroke stainless endcap

69,88

This aluminium two stroke silencer offers the same excellent value for money that our silencers always have but now with improved build quality and precision

– CNC machined mounting end cap with 3 holes precision drilled for mounting to exhaust chamber flange

– stainless steel exit end cap and nozzle

– cartridge glass wool insulation for greater longevity

– tough anodized body finish for enhanced looks and weather resistance

– Silencer is designed with a built-in sealing ‘O’ ring and stainless steel bolts and washers are provided.

Compatible Parts:

All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!

Other Alternative Products:

EXSL-0003 carbon

EXSL-0004 carbon/Kevlar

If you want to fit this silencer to your 2 stroke and you don’t have a TYGA chamber, this is possible but please also use/order alg-10002 (tper-0022).

Silencer carbon “SHORTY” 2 stroke

158,99 139,00

This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40 kg) is made from CNC machined end caps joined by a carbon fiber tube. It has a built-in sealing 'O' ring and is supplied with stainless steel bolts and washers for fitment.

“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers' silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”

Compatible Products:

All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!

Other Alternative Products:

EXSL-0067 Shorty Aluminium

EXSL-0066 Shorty Carbon/Kevlar

EXSL-9005 Aluminium

EXSL-0003 Carbon

Silencer carbon 2 stroke

158,99 138,99

This high quality lightweight silencer is made from CNC machined end caps joined by a carbon fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.

Compatible Products:

All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!

Other Alternative Products:

EXSL-9005 aluminium

EXSL-0004 carbon/Kevlar

If you want to fit this silencer to your 2 stroke and you don’t have a TYGA chamber, this is possible but please also order alg-10002 (tper-0022).

Silencer clamp single 60mm

10,81

This single silencer clamp is specifically designed for TYGA expansion chambers for the Honda NSR150 and Aprilia RS125

Designed to securely clamp 60~61mm O.D. silencers.

Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.

Compatible with the following TYGA systems:

EXCS-0002

EXCS-0007

EXCS-0013

EXCS-0019

EXCS-0037

Please note that the correct clamp is provided when you purchase any complete expansion chamber system with silencers. You do not need to order separately.

Silencer kevlar/carbon “SHORTY” 2 stroke

158,99 139,00

This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40kg) is made from CNC machined end caps joined by a Carbon/Kevlar fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.

“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”

Compatible Products:

All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!

Other Alternative Products:

EXSL-0065 Shorty Carbon

EXSL-0067 Shorty Aluminium

EXSL-9005 Aluminium

EXSL-0003 Carbon

EXSL-0004 Carbon/Kevlar

Mostrando 1–12 de 14 resultados

Contacta con nosotros

No siempre estamos disponibles. Sin embargo, nos puede enviar un email y nos pondremos en contacto contigo lo antes posible.

¿No es legible? Cambia el texto. captcha txt
0

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.

ACEPTAR
Aviso de cookies