Piezas de carbono Suzuki RGV250 VJ22

Carbon (silver) heel guard right, VJ22/ NC30/NC35

30,99

This lightweight carbon heel guard can be used as a direct replacement for the heavy steel one on the VJ22 RGV250. It can also be fitted to many other models, being suitable for most models which have Nissin master cylinders with 45-49 mm. pitch mounting holes.

Note this product is not supplied with STAA-0002 and STAA-0003 step kits but it is supplied with STAA-0004. Please add this product to your cart if you require a right side carbon heel guard for the STAA-0002 and STAA-0003.

Carbon exhauststay left, Suzuki RGV 250

25,88

Carbon Exhaust hanger stay for RGV250. This product is used to secure the left side silencer for systems with a side by side silencer. It can be used with or without the passenger footpeg assembly so it is suitable for both street and race bikes

Compatible with the following TYGA exhaust systems:

EXCS-0009

EXCS-0014

Let your bike stand out from the crowd with this beautiful carbon fibre product.

Carbon exhauststay right, Suzuki RGV 250

25,88

Carbon Exhaust hanger stay for VJ22 RGV250. This product is used to secure the right side silencer for all types of TYGA exhaust systems for the VJ22 . It can be used with or without the passenger footpeg assembly so it is suitable for both street and race bikes.

Compatible with the following TYGA exhaust systems:

EXCS-0009

EXCS-0010

Let your bike stand out from the crowd with this beautiful carbon fibre product.

Carbon front fender, Suzuki RGV 250

152,97

Carbon front fender, Suzuki RGV 250

Direct replacement of the origianl RGV250 part, made of carbon fibre.

Let your bike stand out from the crowd with this beautiful carbon fibre product.

PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish

Carbon heel guard right, VJ22/ NC30/NC35

30,98

This lightweight carbon heel guard can be used as a direct replacement for the heavy steel one on the VJ22 RGV250. It can also be fitted to many other models, being suitable for most models which have Nissin master cylinders with 45-49 mm. pitch mounting holes.

Note this product is not supplied with STAA-0002 and STAA-0003 step kits but it is supplied with STAA-0004. Please add this product to your cart if you require a right side carbon heel guard for the STAA-0002 and STAA-0003.

Carbon parking brake

39,49

Carbon parking brake (alg-10177)

The TYGA Parking Brake is simple but effective and fits pretty much every motorcycle with a hydraulic front brake system, both on and off road. Made from stylish and strong carbon fiber it locks the bike and prevents the bike rolling forward or back while in a parked position. Slip the TYGA Parking Brake into position over the throttle and front brake lever and it will lock the front wheel solid. Useful for a variety of situations:

-When parking on uneven ground, gives peace of mind that the bike will not roll off sidestand

-Useful for locking the motorcycle front wheel during transportation of the motorcycle in or on another vehicle

-Handy for bleeding air out of the front brake system of the bike. Applied over night it will help to squeeze the air to the bleed nipples and reservoir etc.

Don’t worry, it is impossible to forget to remove before riding because it covers the throttle so it has this inherent built in safety feature.

It is one of those things that you probably thought you never needed but once you have this TYGA Parking Brake, you’ll be surpised how handy it is!

Designed by Zanti factory

Carbon race airbox, Suzuki RGV250 VJ22

529,00 485,00

Carbon race airbox, Suzuki RGV250 VJ22 (suz-10098)

Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.

And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( + 53%).

The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)

Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.

The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.

All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.

Greater maximum power (+3 hp *)

Better throttle response

Higher max. RPM (+ 500 rpm)

A GP “sound”

Improved access for maintenance

jet #310 – #320 (*)

Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).

The filter is washable and gives better performance then original

* Standard engine

Carbon Rear hugger with chainguard, Suzuki RGV 250

164,54

Rear Hugger/Chain Guard (Carbon), VJ22 RGV250

This product is designed to fit both the braced and ‘banana’ arm model VJ22s and is ideal for countries where regulations stipulate a chain guard for street bikes.

Let your bike stand out from the crowd with this beautiful carbon fibre product.

Mostrando 1–12 de 16 resultados

Contacta con nosotros

No siempre estamos disponibles. Sin embargo, nos puede enviar un email y nos pondremos en contacto contigo lo antes posible.

¿No es legible? Cambia el texto. captcha txt
0

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.

ACEPTAR
Aviso de cookies