Piezas de carbono Honda NSR250 MC21

Carbon (silver) heel guard right, VJ22/ NC30/NC35

30,99

This lightweight carbon heel guard can be used as a direct replacement for the heavy steel one on the VJ22 RGV250. It can also be fitted to many other models, being suitable for most models which have Nissin master cylinders with 45-49 mm. pitch mounting holes.

Note this product is not supplied with STAA-0002 and STAA-0003 step kits but it is supplied with STAA-0004. Please add this product to your cart if you require a right side carbon heel guard for the STAA-0002 and STAA-0003.

Carbon chain guard “stock”, Honda NSR250 MC21

65,00

Chain Guard (Carbon), NSR250 MC21

This carbon chain guard replaces the stock plastic part which after 25 years is starting to look a bit faded and battered on most MC21s. By replacing it with the TYGA part, your swing arm will look fresh and tidy!

Note, this product cannot be used with hugger BPCH-0002 without first modifying it because it uses the same mounting hole as the hugger uses.

Carbon fairing set street GP-T, Honda NSR250 MC21/MC28

1.499,00

Kit, Fairing Set, Carbon, (Street), NSR250 GP-T

This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NSR250. As well as bringing the NSR250 up to date, it also offers huge weight saving and easy fitment and removal. Similar to a GP bike, the fairing is held on by R clips and nylon bungs for quick release. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.

Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.

As well as this fairing BPFS-0138 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0137

* A clear screen is provided unless you specify tinted in the comment box at check out.

** We recommend trial fitting and making and minor adjustments before painting

Carbon fairing stay side 77mm (pair), Honda NSR250 MC21/MC28

69,01

Fairing Stay, Side, Pair, Carbon

Designed to replaced fixed side stays these lightweight carbon fiber stays are supplied with nylon bungs and ‘R’ clips, for quick release. This product can also be used with many race fairings such as the TYGA Honda RSW and GP250 style or similar applications. See drawing for dimensions. Also see similar product BPSY-0143 Assy.

Dimensions:

BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.

BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.

Compatible products:

TYGA upper cowlings, BPFU-0005, BPFU-9005, BPFU-9014

Carbon fairing stay side 87mm (pair), universal

69,01

Fairing Stay, Side, Pair, Carbon, NSR250, GP-T, Assy.

Designed specifically for the NSR250 GP-T fairing, these side stays fit to the frame in the same position as the steel Honda stays. Made from lightweight carbon fiber with nylon bungs and 'R' clips, they are longer than stock and provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or similar application. See drawing for dimensions. Also see similar product BPSY-0144 Assy.

Dimensions:

BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.

BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.

Compatible products:

TYGA upper cowlings, BPFU-9033 and BPCU-9033.

Carbon front break reservoir stay, Honda NSR250

34,97

Replacement for tired the stock front brake resevoir stay. This trick carbon stay can be used as a direct replacement for the heavy steel one on the NSR250. It weighs about 25% of the original and as well as being stiff and strong, looks like it belongs on a GP bike.

Beautiful, perfect fitment and give your bike that HRC look.

Carbon front fender rsw style, Honda MC18/MC19/MC21/MC22/MC28

156,89

This is the carbon version of our RSW front fender for enhanced looks, strength and light weight. Gives the appearance of a modern front end with inverted forks and fits using the original fasteners. This front fender is suitable for many Honda sports bike models such as:

all model NSR250s, MC18~28

MC19 and MC22 CBR250RR

CB400SF Super Four

Honda Bros/Hawk 400/650. (needs 110/70 section tyre fitted)

This product will not fit the NC23, NC29 CBR400RR, NC30. For these models, use BPCF-9002, for NC35, use BPCF-9005

Carbon generator/sprocket cover, Honda NSR250 MC18/MC21/MC28

196,02

Generator/Front Sprocket Cover NSR250

This lightweight carbon component will make your engine look like it belongs in the GP paddock!Complete with all mounting holes to install speedometer drive and cable guide for side stand switch.

Important, this products re-uses the stock engine case guard from the plastic cover.

Carbon heel guard right, VJ22/ NC30/NC35

30,98

This lightweight carbon heel guard can be used as a direct replacement for the heavy steel one on the VJ22 RGV250. It can also be fitted to many other models, being suitable for most models which have Nissin master cylinders with 45-49 mm. pitch mounting holes.

Note this product is not supplied with STAA-0002 and STAA-0003 step kits but it is supplied with STAA-0004. Please add this product to your cart if you require a right side carbon heel guard for the STAA-0002 and STAA-0003.

Mostrando 1–12 de 30 resultados

Contacta con nosotros

No siempre estamos disponibles. Sin embargo, nos puede enviar un email y nos pondremos en contacto contigo lo antes posible.

¿No es legible? Cambia el texto. captcha txt
0

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.

ACEPTAR
Aviso de cookies