Carbon carburettor tray, Honda VFR400/RVF400

218,57

The carburetors on the NC30/35 are particularly prone to heat from the engine, which in turn heats up the fuel and lowers efficiency.

The TYGA carb tray for the NC30/35 aids in keeping the heat of the engine away from the carbs, and is fully compatible with all standard components. It will also help with keeping debris away from the carbs, if the carbs are being run full open.

No special tools are required to fit the carb tray.

Carbon race airbox, NC30 NC35

193,15

Perfect carburation requires a large volume of still air which most airboxes struggle to achieve.

Our race airbox increases this volume by 8% for more stable performance.

Great product for road but also on track!

Carburettor tray “GRP”, Honda VFR400/RVF400

109,29

The carburetors on the NC30/35 are particularly prone to heat from the engine, which in turn heats up the fuel and lowers efficiency.

The TYGA carb tray for the NC30/35 aids in keeping the heat of the engine away from the carbs, and is fully compatible with all standard components. It will also help with keeping debris away from the carbs, if the carbs are being run full open.

No special tools are required to fit the carb tray.

Race airbox, “ram air”, Honda RVF400

147,20

This race airbox has a larger and longer inlet than stock to allow for greater airflow and better breathing including ram air affect. Unlike other similar products available, as well as the modified inlet, this airbox increases the volume by 8% overstock for more stable performance. Uniquely, among aftermarket suppliers, the Tyga airboxes retain the correct profile on the base for an effective seal when installed just like the original airbox.

NOTE: This airbox will also fit the Honda VFR400, but you will need to shorten the airduct. Because of the cross beam on the frame is in a different position, it would hit the air duct at the front.

Mostrando los 6 resultados