Carenados Honda NSR250 MC28
Carbon lower cowling GP-T, Honda NSR250 MC21/MC28
617,08€Lower Cowling (Carbon), NSR250 GP-T, Assy.
This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138
.
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPCU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
Carbon seat cowling stock shape street single, Honda NSR250 MC28
815,04€Seat Cowling (Carbon), NSR250 MC28, Stock Shape, Street Assy.
This lightweight seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape. Unlike the plastic part, it doesn’t have joins between the sides and the tail piece and it can even be ordered without the passenger seat pad strap holes to give a factory race look. There is no compromise in practicality though, and the panel features the luggage door and all mounting tabs for the taillight, duct shroud and luggage bracket. It can be used with stock Honda parts or TYGA parts such as BPCX-0001 and BPCC-0013 (shown in some of the photos below).
Note: BPCT-0007B luggage door is included and can also be ordered seperately.
Carbon upper cowling GP-T, Honda NSR250 MC21/MC28
714,38€Upper Cowling Street (Carbon), NSR250, GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the NSR250 a contemporary look. This upper cowling utilizes stylish twin double unit LED headlight units, BPLT-0027. Together with lower cowling BPFL-9033 and other mounting hardware it comprises set BPFS-0138.
This cowling is supplied with a plastic bung to mount to the meter stay.
See also BPFU-9033 for GRP (Glass reinforced plastic) version of this product.
Compatible parts:
BPCL-9033 Lower Cowling
TYLY-0121 Upper Stay
BPLT-0027 Headlight
BPSY-0155 Fairing Adaptor Stay
BPSY-0143A Side Stay Kit
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
Mostrando 13–24 de 121 resultados
