Carbon lower cowling GP-T, Honda NSR250 MC21/MC28

617,08

Lower Cowling (Carbon), NSR250 GP-T, Assy.

This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138

.

Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033

It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.

Compatible products:

This product must be used with BPCU-9033

This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:

1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested

2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary

3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.

Carbon parking brake

51,86

El freno de estacionamiento TYGA es simple pero efectivo y se adapta a casi todas las motocicletas con un sistema de freno delantero hidráulico, tanto dentro como fuera de la carretera. Hecho de fibra de carbono resistente y con estilo, bloquea la bicicleta y evita que la bicicleta se desplace hacia adelante o hacia atrás mientras está estacionado. Deslice el freno de estacionamiento TYGA en posición sobre el acelerador y la palanca del freno delantero para que la rueda delantera quede firme. Útil para una variedad de situaciones:
-Cuando se estacione en un terreno irregular, le da la tranquilidad de que la bicicleta no se deslizará hacia un lado. – Útil para bloquear la rueda delantera de la motocicleta durante el transporte de la motocicleta en otro vehículo
– Manejar para purgar el aire del sistema de frenos delantero de la bicicleta. Aplicado durante la noche, ayudará a exprimir el aire a los niples y el depósito de purga, etc.
No se preocupe, es imposible olvidarse de remover antes de conducir porque cubre el acelerador, por lo que tiene esta característica de seguridad incorporada inherente.
Es una de esas cosas que probablemente pensó que nunca necesitó, pero una vez que tenga este freno de estacionamiento TYGA, ¡se sorprenderá de lo útil que es!

Carbon race airbox lid, Honda NSR250 MC21/MC28

255,18

The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.

This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.

As well as potential power improvements over the stock airbox, there is no denying it certainly looks a lot more trick than the Honda one too!

Carbon seat cowling stock shape street single, Honda NSR250 MC28

815,04

Seat Cowling (Carbon), NSR250 MC28, Stock Shape, Street Assy.

This lightweight seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape. Unlike the plastic part, it doesn’t have joins between the sides and the tail piece and it can even be ordered without the passenger seat pad strap holes to give a factory race look. There is no compromise in practicality though, and the panel features the luggage door and all mounting tabs for the taillight, duct shroud and luggage bracket. It can be used with stock Honda parts or TYGA parts such as BPCX-0001 and BPCC-0013 (shown in some of the photos below).

Note: BPCT-0007B luggage door is included and can also be ordered seperately.

Carbon swingarm cover, Honda NSR250 MC28

183,34

This lightweight carbon cover fits over the stock swing arm on the MC28 NSR250. It is designed to protect against scratches and enhance your bike’s appearance. Fit in minutes.

Beautiful, perfect fitment and give your bike that HRC look

Carbon upper cowling GP-T, Honda NSR250 MC21/MC28

714,38

Upper Cowling Street (Carbon), NSR250, GP-T, Assy.

Stylish replacement fairing designed in-house by TYGA Performance to give the NSR250 a contemporary look. This upper cowling utilizes stylish twin double unit LED headlight units, BPLT-0027. Together with lower cowling BPFL-9033 and other mounting hardware it comprises set BPFS-0138.

This cowling is supplied with a plastic bung to mount to the meter stay.

See also BPFU-9033 for GRP (Glass reinforced plastic) version of this product.

Compatible parts:

BPCL-9033 Lower Cowling

TYLY-0121 Upper Stay

BPLT-0027 Headlight

BPSY-0155 Fairing Adaptor Stay

BPSY-0143A Side Stay Kit

SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T

Mostrando 25–36 de 42 resultados