Escapes Tyga Honda MSX125SF 2016
Silencer stainless steel Motogp style (4 stroke) 35mm «maggot»
235,68€Maggot silencer with 35 mm. inside inlet diameter. Same as MSX125 model but without mounting lug. Includes mounting clamp, springs and spring hooks to weld to existing system.
Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application. Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.
All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.
Stay maggot silencer, Honda MSX125SF GROM
25,71€Stay, Maggot Silencer, MSX125SF, High Level Exhaust
This product allows for the use of a TYGA Performance high level full race system with the 2016 second generation MSX125SF Grom. Some small modification to the rear fender is required to allow for installation, but once installed, the stay is neat and tidy and unobtrusive. This product is suitable for, and included with, the following model exhaust:
EXPS-0065 Set, Pipe, Full Race system, MSX125SF Grom, Moto Maggot
Note: This product can be ordered individually and used for customizing your bike with any high level exhaust. See also similar product BPSY-0177 which has the mounting holes further toward the rear and is used with our oval silencer full race system EXPS-0066 and EXPS-0067.
Stay oval silencer, Honda MSX125SF GROM
24,70€Stay, Silencer, High Level Exhaust, MSX125
This product allows for the use of a TYGA Performance high level full race system with the 2016 second generation MSX125SF Grom. Some small modification to the rear fender is required to allow for installation, but once installed, the stay is neat and tidy and unobtrusive. This product is suitable for, and included with, the following model exhausts:
EXPS-0066 Set, Pipe, Full Race system, MSX125SF Grom, Carbon Oval/Carbon End Cap
EXPS-0067 Set, Pipe, Full Race system, MSX125SF Grom, Stainless Oval/Carbon End Cap
Note: This product can be ordered individually and used for customizing your bike with any high level exhaust. See also similar product BPSY-0175 which has the mounting holes further forward and is used with our Maggot full race system EXPS-0065.
TYGA / Kitaco Power up kit «carbon», Honda MSX125 GROM
El precio original era: 856,90€.639,00€El precio actual es: 639,00€.TYGA/KITACO Power Up Kit, Carbon Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0041 Set, Pipe, Full Race System, MSX125 Grom, Carbon Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA / Kitaco Power up kit «maggot», Honda MSX125 GROM
El precio original era: 801,90€.586,00€El precio actual es: 586,00€.TYGA/KITACO Power Up Kit, Maggot Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0042 Set, Pipe, Full Race System, MSX125 Grom, Mot Maggot
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA / Kitaco Power up kit «stainless», Honda MSX125 GROM
El precio original era: 845,90€.559,00€El precio actual es: 559,00€.TYGA/KITACO Power Up Kit, Stainless Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0052 Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
Mostrando 13–21 de 21 resultados
