Carenados Tyga
Carbon seat cowling stock shape street single, Honda NSR250 MC28
839,49€Seat Cowling (Carbon), NSR250 MC28, Stock Shape, Street Assy.
This lightweight seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape. Unlike the plastic part, it doesn’t have joins between the sides and the tail piece and it can even be ordered without the passenger seat pad strap holes to give a factory race look. There is no compromise in practicality though, and the panel features the luggage door and all mounting tabs for the taillight, duct shroud and luggage bracket. It can be used with stock Honda parts or TYGA parts such as BPCX-0001 and BPCC-0013 (shown in some of the photos below).
Note: BPCT-0007B luggage door is included and can also be ordered seperately.
Carbon seat set race, Aprilia RS250
El precio original era: 1.319,88€.970,00€El precio actual es: 970,00€.APRILIA RS250
Debido a la demanda popular, nuestro kit de carenado delantero GP ahora está disponible en versión carbon race. Estos paneles son más ligeros y más fuertes que el GRP. Terminados en tres capas de capa transparente resistente para proteger contra la luz UV, están listos para usar y no requieren pintura. * Este kit incluye las piezas que se muestran en la imagen que también están disponibles por separado.
* Tenga en cuenta que no incluye el kit de carenado frontal. Los gráficos que se muestran en las fotos no están incluidos.
Este kit se suministra con todos los soportes adicionales necesarios para montarlo en un Aprilia RS-250.
Si tiene cámaras de salida izquierda y derecha (side by side), deberá agregar 1 X de escape a su pedido (solo una suministrada en el kit para dos cámaras de salida derecha)
Para los propietarios de Aprilia RS250 MK1, puede utilizar este carenado pero no es un ajuste directo.
El tablero es diferente, los medidores digitales (MK2) se ajustan al marco TYGA.
El tanque MK1 tiene el mismo aspecto pero es un poco diferente. El asiento necesita ajuste, el tanque es un poco más grande.
El tanque de enfriamiento y aceite están en el subchasis (MK1) y en el lado del chasis MK2.
Los pasos a la izquierda y derecha del MK2 tienen agujeros adicionales, el MK1 no los tiene. Necesitas que se ajusten a la cubierta TYGA inferior.
Carbon Seat set RVF, NC35
1.137,05€Stock shape seat cowling with or without taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad. Please specify if you would like taillight holes and taillight mount made for no extra charge.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
This panel can also be ordered in kit BPFS-0066 complete carbon set NC35, street, and BPFS-0068 complete carbon set NC35, race.
Carbon Seat set street GP-T, Honda RVF400 NC35
2.385,18€The ultimate seat set for your V4 Honda!
This modern seat cowling, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC35 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0151 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0149
** We recommend trial fitting and making and minor adjustments before painting
Carbon Seat set street GP-T, Honda VFR400 NC30
2.407,03€The ultimate seat set for your V4 Honda!
Kit, Seat Set, Carbon, (Street), NC30 GP-T
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC30. As well as bringing the NC30 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0150 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0148
** We recommend trial fitting and making and minor adjustments before painting
Carbon seat set street, Aprilia RS250
El precio original era: 1.500,01€.979,01€El precio actual es: 979,01€.Debido a la demanda popular, nuestro kit de cubierta de asiento GP ahora está disponible en carbono. Estos paneles son más ligeros y más fuertes. Repartidos en tres capas de resistente capa transparente para proteger contra la luz UV, están listos para usar y no requieren pintura.
* Este kit incluye las partes que se muestran a continuación, que también están disponibles por separado.
Carbon set, Aprilia RS125 ( 1996-2006)
489,25€Deje que Aprilia Rs125 se destaque entre la multitud con estas hermosas piezas de fibra de carbono, un juego completo para la Aprilia RS125 de 1996-2006.
Las piezas son:
Guardabarros delantero
Guardabarros trasero
Protector de cadena
Disfrute de grandes ahorros en los precios de los productos y el envío al ordenar las piezas juntas en un juego en lugar de por separado.
Carbon set, Aprilia RS125 (2007-2010)
513,97€Deje que Aprilia Rs125 se destaque entre la multitud con estas hermosas piezas de fibra de carbono, un juego completo para el 2007-2010 Aprilia RS125.
Las piezas son:
Guardabarros delantero
Guardabarros trasero
Protector de cadena
Disfrute de grandes ahorros en los precios de los productos y el envío al ordenar las piezas juntas en un juego en lugar de por separado.
Carbon set, Aprilia RS250
441,88€Aprilia RS250
Juego de guardabarros carbono
Actualice su moto con estos hermosos productos de carbono, con la misma forma que el original. Se ajusta en minutos.
Un juego contiene:
Guardabarros delantero
Guardabarros trasero
Compre un juego completo y le ahorrará dinero.
TENGA EN CUENTA: todos los adhesivos con el logotipo «TYGA» en los productos de carbono se pueden quitar fácilmente porque se colocan por encima del acabado transparente.
Carbon set, Suzuki RGV 250
483,07€Suzuki RGV 250
Contiene:
Guardabarros delantero
Guardabarros trasero
Actualice su moto con estos hermosos productos de carbono, con la misma forma que el original. Se ajusta en minutos.
Compra un juego completo y te ahorra dinero.
TENGA EN CUENTA: todos los adhesivos con el logotipo «TYGA» en los productos de carbono se pueden quitar fácilmente porque se colocan por encima del acabado de la capa transparente.
Mostrando 49–60 de 283 resultados
