Piezas de carbono Tyga

Lower cowling RSW, Honda NSR250 MC21/MC28

301,21€

Modelled on the RSW GP race bike design and adapted to fit the NSR250, this lower cowling represents the ultimate in fairing design for the NSR. Keeping the width to an absolute minimum, the design gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and improved design giving excellent finish both inside and out. Weight is now only approx. 1 kg but strength retained using a lip around the edge.

This product is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.

Compatible products:

This product must be used with BPFU-9012

This lower cowling is designed to be used with stock or race systems though some spacing may be necessary to get clearance with chambers:

1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested

2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary

3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.

Añadir al carrito

Mini DEPÓSITO liquido DE FRENO

18,77€

Este mini depósito de liquido de frenos es el toque final perfecto para una moto de carreras o una moto de calle. Este depósito de rendimiento de Tyga, a diferencia de otras marcas conocidas, ¡viene completo con un tapón de rosca recubierto de carbono para ese punto final! Ahora provisto de un mini soporte para montar en la tija, bomba de freno o interruptor de stop.

Añadir al carrito

Race airbox lid, Honda NSR250 MC21/MC28

163,62€

The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.

This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.

This is the budget version in GRP. For carbon version, please also check out BPCX-9010.

Añadir al carrito

Seat cowling with carbon assy, Honda NSR250 MC28

452,75€

We now make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or to use on a model other than the MC21 or MC28. For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

Tyga Performance Compatible Parts for this Product:

This product should be used with:

TYLY-0007 Subframe

TYLY-0006 Battery Box

BPSP-0001A Seat Pad

BPAC-0001 Rear Brake Reservoir Kit,

And also as well as the above on street versions:

BPLT-0008 LED Taillight

BPFX-9006 Registration Plate Holder

Añadir al carrito

Seat set race carbon GP-T, Honda NSR250 MC21

1.562,42€

Kit, Seat Set, Carbon (Race), MC21 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises parts shown below which are also available separately.

Note there are 4 MC21 GT-T seat cowling kits to choose from:

BPFS-0129 Street GRP

BPFS-0130 Race GRP

BPFS-0131 Street Carbon

BPFS-0132 Race Carbon

Añadir al carrito

Seat set race carbon GP-T, Honda NSR250 MC28

1.562,42€

Kit, Seat Set, Carbon (Race), MC28 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.

Note there are 4 MC28 GT-T seat cowling kits to choose from:

BPFS-0133 Street GRP

BPFS-0134 Race GRP

BPFS-0135 Street Carbon

BPFS-0136 Race Carbon

Note, some pictures below show the street version with taillight and turn signals which are not included in this kit.

Añadir al carrito

Seat set street carbon GP-T, Honda NSR250 MC28

1.792,94€

Kit, Seat Set, Carbon (Street), MC28 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Street Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.

Note there are 4 MC28 GT-T seat cowling kits to choose from:

BPFS-0133 Street GRP

BPFS-0134 Race GRP

BPFS-0135 Street Carbon

BPFS-0136 Race Carbon

Añadir al carrito

Seat set with carbon RC211V, NC35

564,90€

This is the seat cowling with carbon front section used in the NC35 RC211V style seat cowling kit BPFS-0035.

This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.

To be used with

subframe TYLY-0025

battery box TYLY-0026

taillight BPLT-0013

registration/license plate holder BPCX-9007

Mostrando 145–152 de 152 resultados