Carenados Tyga – Página 18 – Clasic Bike Obsession

Seat set race carbon GP-T, Honda NSR250 MC21

1.562,42€

Kit, Seat Set, Carbon (Race), MC21 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises parts shown below which are also available separately.

Note there are 4 MC21 GT-T seat cowling kits to choose from:

BPFS-0129 Street GRP

BPFS-0130 Race GRP

BPFS-0131 Street Carbon

BPFS-0132 Race Carbon

Añadir al carrito

Seat set race GP-T, Honda NSR250 MC18

1.244,84€

Kit, Seat Set, GRP (Race), MC18 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC18.

‘Note this kit has been designed primarily for the 1989 model but will also fit the 1988. Note that for the 1988 model, the exhaust stays are suitable for our TYGA exhaust system but not the stock exhausts. The wiring harness differs on the 1988 model so there may be some modification of the wiring harness required.’

The kit comprises parts shown below which are also available separately.
Note there are 3 MC18 GP-T seat cowling kits to choose from:

BPFS-0160 Street GRP

BPFS-0161 Race GRP

BPFS-0162 Street Carbon

Añadir al carrito

Seat set race GP-T, Honda RVF400 NC35

1.156,26€

The ultimate seat set for your V4 Honda!

This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.

The kit is supplied with all mounting hardware including subframe and battery box.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.

** We recommend trial fitting and making and minor adjustments before painting

Añadir al carrito

Seat set race GRP GP-T, Honda NSR250 MC21

905,58€

Kit, Seat Set, GRP (Race), MC21 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises parts shown below which are also available separately.

Note there are 4 MC21 GT-T seat cowling kits to choose from:

BPFS-0129 Street GRP

BPFS-0130 Race GRP

BPFS-0131 Street Carbon

BPFS-0132 Race Carbon

Añadir al carrito

Seat set race GRP GP-T, Honda NSR250 MC28

905,58€

Kit, Seat Set, GRP (Race), MC28 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Street Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.

Note there are 4 MC28 GT-T seat cowling kits to choose from:

BPFS-0133 Street GRP

BPFS-0134 Race GRP

BPFS-0135 Street Carbon

BPFS-0136 Race Carbon

Note, some pictures below show the street version with taillight and turn signals which are not included in this kit.

Añadir al carrito

Seat set race RC211V, NC30 kit

656,58€

Seat set race RC211V, NC30 kit

This set of bodywork is designed to replace the stock NC30 seat cowling with the race version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This kit gives a roomier riding position and enhanced modern looks over the stock bike.

This product is suitable for the NC30 and is the race version without the street gear. We also offer two street versions of the same product which also include an LED Tailight and a registration/license plate holder.

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.

Añadir al carrito

Seat set race RC211V, NC35 kit

778,51€

This set of bodywork is designed to replace the stock seat cowling with the race version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.

This product is suitable for the NC35 and is the race version without the street gear. We also offer two street versions of the same product which also include an LED Tailight and a registration/license plate holder, see:

BPFS-0029 (street, carbon front section)

BPFS-0035 (street GRP)

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.

Añadir al carrito

Seat set race, Aprilia RS250

623,32€

Aprilia RS250

Juego de asientos de carreras

Este kit comprende todas las piezas que se muestran en la imagen, que también están disponibles por separado.

Este kit se suministra con todos los sujetadores adicionales necesarios para montarlo en un Aprilia RS250

Añadir al carrito

Seat set race, Honda NSR250 MC21

627,71€

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21. The kit comprises parts shown in the picture which are also available separately.

We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

Añadir al carrito

Seat set race, Honda NSR250 MC28

599,71€

This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.

We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

Añadir al carrito

Seat set race, Suzuki RGV 250

750,61€

Uno de nuestros kits TYGA más populares de los últimos años.

Diseñado para el Suzuki RGV250, pero usado en otras motos en todo el mundo.
Este conjunto de carrocería comprende las partes que se muestran en la imagen que también están disponibles por separado.
Se suministra con todos los soportes adicionales necesarios para montarlo en un stock VJ22.
Si tiene escapes SIDE BY SIDE , deberá agregar 1 suz-10006 a su pedido (se suministra uno en el kit para tipo standard de doble salida derecha)

Laminado en moldes de alta calidad por nuestros trabajadores calificados y con experiencia. Los productos de fibra de vidrio TYGA Performance son reconocidos por su calidad.

Añadir al carrito

Seat set RC211V, NC35

330,14€

This is the all GRP seat cowling used in the NC35 RC211V style seat cowling kits, BPFS-0029 and BPFS-0030.

This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.

To be used with

subframe TYLY-0025

battery box TYLY-0026

taillight BPLT-0013

registration/license plate holder BPCX-9007