461,43€
SILENCIOSO PARA LOS COLECTORES ORIGINALES
Este silenciador es fácil de reemplazar al pesado de aluminio en el sistema original y es una alternativa al sistema de carrera más caro. Construido a partir de fibra de carbono ligera con tapa de salida de carbono y tapa de montaje de aluminio, se sustituye en minutos con los colectores originales. Abrazadera de montaje de acero inoxidable se proporciona cuando compra este producto.
Tenga en cuenta que este silenciador puede no ser legal para algunos estados y territorios
Maggot silencer with 54 mm. inside inlet diameter. No mounting lug.Includes silencer clamp, mounting springs and spring hooks to weld onto existing exhaust tailpipe.
Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application.
Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.
All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.
The TYGA Moto Maggot stainless silencer, with 50.8 mm inside diamter, is definitely not for the fainthearted. The music emitted at full volume is simply ear drum shattering and would not be out of place in the MotoGP paddock.
We’ve used our two stroke pipe manufacturing technology to bring you this all stainless construction of hand rolled and hand welded cones. The 2″ baffle core is also stainless. The silencer is then packed with glass before final welding.
The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ (approx. 50mm) external diameter tail pipe.
“The Maggot” is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are supplied with the kit, which can then be welded to any other system that may need modification to fit the silencer.
Please be aware that this silencer is exceptionally loud! It will, however, get you noticed wherever you go!
The overall length is approx. 320 mm. and fits onto a 2″ pipe section. The clamping area is 4″ in diameter. Contains an inner baffle tube and some sound deadening material but is still very loud; this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system will definitely NOT comply to specific country noise emission regulations and is NOT homologated for street use. You have been warned!
For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.
This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.
Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
