82,26€
This silencer has polished stainless steel endcaps and a carbon fiber tube to produce an attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
This silencer has polished stainless steel endcaps and a carbon fiber tube to produce an attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.
Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
Esta brida de montaje del silenciador permite el montaje de todos los silenciadores TYGA en cualquier cámara de expansión de dos tiempos de acero inoxidable. Simplemente corte la brida de montaje original y suelde la brida de montaje TYGA.
26.5mm de diámetro interior. Algunos sistemas de cámaras de expansión pueden requerir un manguito reductor, o modificación de la brida de montaje para un ajuste perfecto.
Este silenciador liviano de alta calidad está hecho de tapas de extremo mecanizadas CNC unidas por un tubo de fibra de carbono. Tiene un anillo «O» de sellado incorporado y se suministra con tornillos y arandelas de acero inoxidable para el montaje.
Productos compatibles:
Todos los juegos de cámaras Tyga Performance Two Stroke. ¡Recuerde pedir el número correcto de silenciadores para un sistema completo!
Si desea ajustar este silenciador a su 2 tiempos y no tiene una cámara TYGA, esto es posible, pero también pida alg-10002
