11,95€
JUNTA TAPA DE EMBRAGUE ATHENA
YAMAHA RD350 1973-1975
JUNTA TAPA DE EMBRAGUE ATHENA
Athena es equipo original que condujo (desde 1973) del fabricante italiano de motocicletas y muchas otras marcas. Los sellos se fabrican a los estándares europeos de calidad (ISO 9001, ISO TS 16949, ISO 14001) y son por lo tanto bajo el control de calidad constante.
Se garantiza una calidad constante. Athena utiliza OE probado y certificado materias primas para la producción de sus sellos.
YAMAHA RD350 1973-1975
The TYGA Moto Maggot stainless silencer, with 50.8 mm inside diamter, is definitely not for the fainthearted. The music emitted at full volume is simply ear drum shattering and would not be out of place in the MotoGP paddock.
We’ve used our two stroke pipe manufacturing technology to bring you this all stainless construction of hand rolled and hand welded cones. The 2″ baffle core is also stainless. The silencer is then packed with glass before final welding.
The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ (approx. 50mm) external diameter tail pipe.
“The Maggot” is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are supplied with the kit, which can then be welded to any other system that may need modification to fit the silencer.
Please be aware that this silencer is exceptionally loud! It will, however, get you noticed wherever you go!
The overall length is approx. 320 mm. and fits onto a 2″ pipe section. The clamping area is 4″ in diameter. Contains an inner baffle tube and some sound deadening material but is still very loud; this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system will definitely NOT comply to specific country noise emission regulations and is NOT homologated for street use. You have been warned!
For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.
Reposapiés de repuesto para su kit de pasos TYGA, tipo largo. Completo con un tornillo cónico M8x55 para montaje y arandelas de 3x 8 mm. Recomendamos asegurar con un agente de bloqueo de roscas para resistir la vibración.
La nota se compara con el producto similar alg-10133 que es el mismo excepto 78 mm. En lugar de 93 mm. en longitud
Esta abrazadera silenciadora GP está diseñada específicamente para cámaras de expansión estilo TYGA GP para Suzuki RGV250 y Aprilia RS250.
Diseñado para sujetar de forma segura los silenciadores de diametro 60 ~ 61 mm.
También para usar con la carrocería TYGA Suzuki RGV250.
Fabricado en acero inoxidable 304 con caucho moldeado para una sujeción segura.
