ESCAPE JOLLYMOTO YAMAHA TDR250

ESCAPE JOLLYMOTO YAMAHA TDR250

Rango de precios: desde 1.063,59€ hasta 1.258,40€

YAMAHA TDR250

TIPO SIDE BY SIDE UNO POR CADA LADO

COMO LOS ORIGINALES STD

Categorías: , , , , , ,

Información adicional

TIPO SILENCIOSO

ALUMINIO, SIN SILENCIOSO, CARBONO

Productos relacionados

Silencer carbon round, m carbon cap (4 stroke) 2″Silencer carbon round, m carbon cap (4 stroke) 2″
Añadir al carrito

Silencer carbon round, m carbon cap (4 stroke) 2″

491,79€

This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.

Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.

Silencer carbon round (4 stroke) 2″Silencer carbon round (4 stroke) 2″
Añadir al carrito

Silencer carbon round (4 stroke) 2″

434,47€

This silencer has polished stainless steel endcaps and a carbon fiber tube to produce an attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.

Silencer kevlar/carbon 2 strokeSilencer kevlar/carbon 2 stroke
Añadir al carrito

Silencer kevlar/carbon 2 stroke

194,68€

Este silenciador ligero de alta calidad está hecho de tapas de extremo mecanizadas CNC unidas por un tubo de fibra de carbono / Kevlar. Tiene un anillo «O» de sellado incorporado y se suministra con tornillos y arandelas de acero inoxidable para el montaje. 

Productos compatibles: 
Todos los juegos de cámaras Tyga Performance Two Stroke. ¡Recuerde pedir el número correcto de silenciadores para un sistema completo! 

Si desea instalar este silenciador en su 2 tiempos y no tiene una cámara TYGA, esto es posible, pero también solicite alg-10002 

Silencer stainless steel round 86mm (4 stroke) 38,1mmSilencer stainless steel round 86mm (4 stroke) 38,1mm
Añadir al carrito

Silencer stainless steel round 86mm (4 stroke) 38,1mm

323,06€

This silencer has polished stainless steel endcaps and a stainless tube to produce an attractive and lightweight product. It is held to the pipe set using springs for easy fitment and removal. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

Supplied with silencer clamp and fitting hardware.

The Dimensions of this silencer are as follows:

I.D. 38.1mm (slip-on section) O.D. 86mm (diameter of carbon tube) L. 400mm Suitable for small capacity four stroke motorcycles such as Honda CBR125/150, Honda Innouvo etc.