Turn signal relay LED , 1990 Honda

18,88

Turn Signal Relay, Replacement for Honda 1990s Type.

Electronically speed controlled flasher relay especially designed to be used with LED turn signals. This unit will flash at the correct speed regardless of the wattage of the turn signals so it can be used with stock fronts and LED rears, all LEDs or even all stock*.

*For some Hondas such as the NC30 and NC35, this relay works fine with 2 LED turn signals installed or with all four of the stock turn signals installed. However, if 4 LED turn signals are installed, then the instrument warning bulb needs to be removed for the set up to work. Due to the wiring harness on these models requiring a resistance higher than the LEDs can provide, all four turn signals will flash if you turn left or right on if you have LEDs installed front and rear and if you don’t remove the instrument warning bulb. Alternatively, inline load resistors can be installed and then the instrument bulb does not need to be removed.

Easy to install, plugs and plays where the stock Honda one is installed. Re-use the stock Honda rubber sheath for mounting it.

Descripción

Turn Signal Relay, Replacement for Honda 1990s Type.

Electronically speed controlled flasher relay especially designed to be used with LED turn signals. This unit will flash at the correct speed regardless of the wattage of the turn signals so it can be used with stock fronts and LED rears, all LEDs or even all stock*.

*For some Hondas such as the NC30 and NC35, this relay works fine with 2 LED turn signals installed or with all four of the stock turn signals installed. However, if 4 LED turn signals are installed, then the instrument warning bulb needs to be removed for the set up to work. Due to the wiring harness on these models requiring a resistance higher than the LEDs can provide, all four turn signals will flash if you turn left or right on if you have LEDs installed front and rear and if you don’t remove the instrument warning bulb. Alternatively, inline load resistors can be installed and then the instrument bulb does not need to be removed.

Easy to install, plugs and plays where the stock Honda one is installed. Re-use the stock Honda rubber sheath for mounting it.