Este mini depósito de liquido de frenos es el toque final perfecto para una moto de carreras o una moto de calle. Este depósito de rendimiento de Tyga, a diferencia de otras marcas conocidas, ¡viene completo con un tapón de rosca recubierto de carbono para ese punto final! Ahora provisto de un mini soporte para montar en la tija, bomba de freno o interruptor de stop.
Estas tapas de válvula de escape TYGA de aluminio 6061 T6 ofrecen una gran mejora estética del motor y también cumplen la función de mantener el área de la cámara de la válvula libre de residuos de escape.
El aceite residual se almacena en un bote para que sea mas cómodo el vaciado.
El sellado de la cubierta del cilindro se realiza mediante una ranura mecanizada por CNC equipada con una junta tórica, por lo que no hay más juntas rotas. Tornillos de acero inoxidable M5.
Este kit incluye las siguientes partes:
2x tapas
2x juntas tóricas
8x M5 tornillos de cabeza Botón
2x manguera
1x botella de captura
The TYGA Moto Maggot stainless silencer, with 50.8 mm inside diamter, is definitely not for the fainthearted. The music emitted at full volume is simply ear drum shattering and would not be out of place in the MotoGP paddock.
We’ve used our two stroke pipe manufacturing technology to bring you this all stainless construction of hand rolled and hand welded cones. The 2″ baffle core is also stainless. The silencer is then packed with glass before final welding.
The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ (approx. 50mm) external diameter tail pipe.
“The Maggot” is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are supplied with the kit, which can then be welded to any other system that may need modification to fit the silencer.
Please be aware that this silencer is exceptionally loud! It will, however, get you noticed wherever you go!
The overall length is approx. 320 mm. and fits onto a 2″ pipe section. The clamping area is 4″ in diameter. Contains an inner baffle tube and some sound deadening material but is still very loud; this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system will definitely NOT comply to specific country noise emission regulations and is NOT homologated for street use. You have been warned!
For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.
Se adapta a todos los sistemas de dos tiempos TYGA. Esta es una parte de reemplazo. Al solicitar cámaras (EXCS – ****), este artículo está incluido en el precio y no es necesario que ordene estas piezas por separado.
Contacta con nosotros
No siempre estamos disponibles. Sin embargo, nos puede enviar un email y nos pondremos en contacto contigo lo antes posible.
Esta web utiliza cookies para que podamos ofrecerte la mejor experiencia de usuario posible. La información de las cookies se almacena en tu navegador y realiza funciones tales como reconocerte cuando vuelves a nuestra web o ayudar a nuestro equipo a comprender qué secciones de la web encuentras más interesantes y útiles.