RETEN TAPA DE VÁLVULAS ATHENA
HONDA VFR400 (NC30)
HONDA RVF400 (NC35)
Athena es original del equipo principal fabricante italiano de motocicletas. Los sellos se fabrican a la calidad Europea norma ISO 9000 y son por lo tanto bajo el control de calidad constante. Se garantiza una calidad constante. Los materiales de alta calidad, y papel sellado Reinz y Elring hablan por sí mismos.
Para mantener su capacidad de almacenamiento pequeña, Athena cubre para los conjuntos de sellado con juntas adicionales varios modelos de los años de su sello
CNC machined out of solid billet. Dog legged lever for Honda 4 stroke models such as NC23, 29, 30, 35 etc and similar models. (See alternative straight version for NSR250 and CBR250RR).
Este protector de talón de carbono ligero se puede usar como reemplazo directo del pesado de acero en el VJ22 RGV250. También se puede montar en muchos otros modelos, siendo adecuado para la mayoría de los modelos que tienen bomba de freno Nissin con 45-49 mm. orificios de montaje.
También se puede usar para acoplar a casi cualquier palanca de control de pie estándar para reemplazar la parte doblada y dañada simplemente perforando un orificio de 6.3 mm y avellanando en la parte posterior de la palanca.
The TYGA Moto Maggot stainless silencer, with 50.8 mm inside diamter, is definitely not for the fainthearted. The music emitted at full volume is simply ear drum shattering and would not be out of place in the MotoGP paddock.
We’ve used our two stroke pipe manufacturing technology to bring you this all stainless construction of hand rolled and hand welded cones. The 2″ baffle core is also stainless. The silencer is then packed with glass before final welding.
The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ (approx. 50mm) external diameter tail pipe.
«The Maggot» is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are supplied with the kit, which can then be welded to any other system that may need modification to fit the silencer.
Please be aware that this silencer is exceptionally loud! It will, however, get you noticed wherever you go!
The overall length is approx. 320 mm. and fits onto a 2″ pipe section. The clamping area is 4″ in diameter. Contains an inner baffle tube and some sound deadening material but is still very loud; this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system will definitely NOT comply to specific country noise emission regulations and is NOT homologated for street use. You have been warned!
For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.
