JUNTA SILENCIOSO ARROW

JUNTA SILENCIOSO ARROW

3,50€

JUNTA SILENCIOSO ORIGINAL ARROW 2 TORNILLOS

APRILIA RS250

SUZUKI RGV250

Categorías: , , , , , , , , ,

Descripción

JUNTA SILENCIOSO ARROW 2 TORNILLOS

APRILIA RS250

SUZUKI RGV250

Productos relacionados

Silencer stainless steel Motogp style (4 stroke) 54mm «maggot»Silencer stainless steel Motogp style (4 stroke) 54mm «maggot»
Añadir al carrito

Silencer stainless steel Motogp style (4 stroke) 54mm «maggot»

284,37€

Maggot silencer with 54 mm. inside inlet diameter. No mounting lug.Includes silencer clamp, mounting springs and spring hooks to weld onto existing exhaust tailpipe.

Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application.

Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.

All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.

Clcik here for PDF

Silencer clamp single 60mm offset
Añadir al carrito

Silencer clamp single 60mm offset

14,68€

Esta abrazadera de silenciador individual está diseñada específicamente para las cámaras de expansión lado a lado de TYGA para el Honda MC18 y el Suzuki RGV250. 
Diseñado para sujetar de forma segura silenciadores de OD de 60 ~ 61 mm. 
También para usar con la carrocería TYGA Suzuki RGV250. 
Fabricado en acero inoxidable 304 con caucho moldeado para una sujeción segura pero segura. 

collar manifold for Exhaust, RGV250 / RS250
Añadir al carrito

collar manifold for Exhaust, RGV250 / RS250

56,22€

Los tubos de escape Tyga Performance Aprilia y RGV250 ahora se suministran con un doble anillo de junta tórica para un sellado superior. Además, las juntas toricas están hechos de Viton, que son resistentes a los fluidos automotrices y son más capaces de soportar temperaturas más altas.

 

Silencer carbon round, m carbon cap (4 stroke) 2″Silencer carbon round, m carbon cap (4 stroke) 2″
Añadir al carrito

Silencer carbon round, m carbon cap (4 stroke) 2″

491,79€

This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.

Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.