HEL rear brake line Brembo 84mm, Honda MSX125 GROM

65,96

Kit includes:

1x HEL Brake Line

4x Sealing Washer

1x M10x1.25 Banjo Bolt

1x M10x1.00 Banjo Bolt

20 degree side bend banjo goes to master cylinder. 20 degree side bend banjo goes to caliper.

See pictures for correct fitting.

Route the hose through the standard brake hose retaining clips

Brembo caliper uses M10x1.00 banjo bolt. Not the same as standard Honda bolt.

For ease of bleeding, the caliper should be removed and orientated so that the bleed nipple is at the highest point.

Descripción

Kit includes:

1x HEL Brake Line

4x Sealing Washer

1x M10x1.25 Banjo Bolt

1x M10x1.00 Banjo Bolt

20 degree side bend banjo goes to master cylinder. 20 degree side bend banjo goes to caliper.

See pictures for correct fitting.

Route the hose through the standard brake hose retaining clips

Brembo caliper uses M10x1.00 banjo bolt. Not the same as standard Honda bolt.

For ease of bleeding, the caliper should be removed and orientated so that the bleed nipple is at the highest point.