Información adicional
| TIPO SILENCIOSO | ALUMINIO, SIN SILENCIOSO, CARBONO |
|---|
ESCAPE JOLLYMOTO SUZUKI RGV250 VJ23
Rango de precios: desde 888,14€ hasta 1.249,93€
SUZUKI RGV250 VJ23
TIPO SIDE BY SIDE UNO POR CADA LADO
COMO LOS ORIGINALES
Productos relacionados
Silencer carbon oval, m carbon cap (4 stroke) 2″
491,79€This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.
Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
Silencer stainless steel Motogp style (4 stroke) 43mm «maggot»
242,75€Maggot silencer with 43 mm. inside diameter. Same dimensions as Ninja 250/300 model but without mounting lug. Includes silencer clamp, mounting springs and spring hooks to weld on existing exhaust system tail pipe.
Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application.Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.
All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.
Silencer stainless steel round 86mm (4 stroke) 38,1mm
323,06€This silencer has polished stainless steel endcaps and a stainless tube to produce an attractive and lightweight product. It is held to the pipe set using springs for easy fitment and removal. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
Supplied with silencer clamp and fitting hardware.
The Dimensions of this silencer are as follows:
I.D. 38.1mm (slip-on section) O.D. 86mm (diameter of carbon tube) L. 400mm Suitable for small capacity four stroke motorcycles such as Honda CBR125/150, Honda Innouvo etc.
