130,76€
KIT DE EMBRAGUE DISCOS Y MUELLES EBC KEVLAR SRC
HONDA VFR400 NC30
KITS DE EMBRAGUE SRC SERIE RACE / SPORT DE ARAMIDA
Set de discos forrados en aramida, completo con muelles de embrague de gran resistencia
Para motocicletas deportivas y motos de carreras
Los kits SRC tienen discos mas duraderos y mayor resistencia térmica
Los kits SRC tienen un agarre del embrague más agresivo / rápido que la serie de embrague CK estándar
No se debe utilizar con aceite integralmente sintético
HONDA VFR400 NC30
The TYGA Moto Maggot stainless silencer, with 50.8 mm inside diamter, is definitely not for the fainthearted. The music emitted at full volume is simply ear drum shattering and would not be out of place in the MotoGP paddock.
We’ve used our two stroke pipe manufacturing technology to bring you this all stainless construction of hand rolled and hand welded cones. The 2″ baffle core is also stainless. The silencer is then packed with glass before final welding.
The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ (approx. 50mm) external diameter tail pipe.
«The Maggot» is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are supplied with the kit, which can then be welded to any other system that may need modification to fit the silencer.
Please be aware that this silencer is exceptionally loud! It will, however, get you noticed wherever you go!
The overall length is approx. 320 mm. and fits onto a 2″ pipe section. The clamping area is 4″ in diameter. Contains an inner baffle tube and some sound deadening material but is still very loud; this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system will definitely NOT comply to specific country noise emission regulations and is NOT homologated for street use. You have been warned!
For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.
Reposapiés de repuesto para su kit de pasos TYGA, tipo largo. Completo con un tornillo cónico M8x55 para montaje y arandelas de 3x 8 mm. Recomendamos asegurar con un agente de bloqueo de roscas para resistir la vibración.
La nota se compara con el producto similar alg-10133 que es el mismo excepto 78 mm. En lugar de 93 mm. en longitud
