ESCAPE JOLLYMOTO HONDA NS400R

ESCAPE JOLLYMOTO HONDA NS400R

Rango de precios: desde 1.253,56€ hasta 1.799,27€

HONDA NS400R

Categorías: , , , , , ,

Información adicional

TIPO SILENCIOSO

ALUMINIO, SIN SILENCIOSO, CARBONO

Productos relacionados

Silencer stainless steel Motogp style (4 stroke) 35mm «maggot»Silencer stainless steel Motogp style (4 stroke) 35mm «maggot»
Añadir al carrito

Silencer stainless steel Motogp style (4 stroke) 35mm «maggot»

242,75€

Maggot silencer with 35 mm. inside inlet diameter. Same as MSX125 model but without mounting lug. Includes mounting clamp, springs and spring hooks to weld to existing system.

Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application. Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.

All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.

 

Click her for PDF

Silencer clamp double GP 60mm (double bolt)Silencer clamp double GP 60mm (double bolt)
Añadir al carrito

Silencer clamp double GP 60mm (double bolt)

42,53€

Esta abrazadera silenciadora GP está diseñada específicamente para cámaras de expansión estilo TYGA GP para Suzuki RGV250 y Aprilia RS250. 
Diseñado para sujetar de forma segura los silenciadores de diametro 60 ~ 61 mm. 
También para usar con la carrocería TYGA Suzuki RGV250. 
Fabricado en acero inoxidable 304 con caucho moldeado para una sujeción segura. 

Silencer carbon oval, m carbon cap (4 stroke) 2″Silencer carbon oval, m carbon cap (4 stroke) 2″
Añadir al carrito

Silencer carbon oval, m carbon cap (4 stroke) 2″

491,79€

This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.

Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.