Este silenciador es fácil de reemplazar al pesado de aluminio en el sistema original y es una alternativa al sistema de carrera más caro. Construido a partir de fibra de carbono ligera con tapa de salida de carbono y tapa de montaje de aluminio, se sustituye en minutos con los colectores originales. Abrazadera de montaje de acero inoxidable se proporciona cuando compra este producto.
Tenga en cuenta que este silenciador puede no ser legal para algunos estados y territorios
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inch internal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0017
This system may not comply to specific country noise emission regulations and is not homologated for street use.
This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The 'slip-on' mount is designed to fit any system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.
Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
Maggot silencer with 43 mm. inside diameter. Same dimensions as Ninja 250/300 model but without mounting lug. Includes silencer clamp, mounting springs and spring hooks to weld on existing exhaust system tail pipe.
Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application.Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.
All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.
Esta web utiliza cookies para que podamos ofrecerte la mejor experiencia de usuario posible. La información de las cookies se almacena en tu navegador y realiza funciones tales como reconocerte cuando vuelves a nuestra web o ayudar a nuestro equipo a comprender qué secciones de la web encuentras más interesantes y útiles.