This silencer has polished stainless steel endcaps and a stainless tube to produce an attractive and lightweight product. It is held to the pipe set using springs for easy fitment and removal. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
Supplied with silencer clamp and fitting hardware.
The Dimensions of this silencer are as follows:
I.D. 38.1mm (slip-on section) O.D. 86mm (diameter of carbon tube) L. 400mm Suitable for small capacity four stroke motorcycles such as Honda CBR125/150, Honda Innouvo etc.
This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.
Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
Esta abrazadera de silenciador individual está diseñada específicamente para cámaras de expansión TYGA para Honda NSR150 y Aprilia RS125. Diseñada para sujetar de forma segura silenciadores de OD de 60 ~ 61 mm. Fabricado en acero inoxidable 304 con caucho moldeado para una sujeción segura pero segura.
This silencer has polished stainless steel endcaps and a carbon fiber tube to produce an attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.
Contacta con nosotros
No siempre estamos disponibles. Sin embargo, nos puede enviar un email y nos pondremos en contacto contigo lo antes posible.
Esta web utiliza cookies para que podamos ofrecerte la mejor experiencia de usuario posible. La información de las cookies se almacena en tu navegador y realiza funciones tales como reconocerte cuando vuelves a nuestra web o ayudar a nuestro equipo a comprender qué secciones de la web encuentras más interesantes y útiles.