¡Oferta!

Carbon race airbox MK2, Aprilia RS250

485,00

Aprilia RS250 MK2

Caja de aire de carrera de carbono MK2
Nuestra caja de aire de carrera está inspirada en la tecnología de carreras de carretera de GP, aprovechando una toma de aire delantera y todo el espacio disponible dentro del compartimiento del motor.
Y al usar la parte inferior del tanque de combustible como cierre para aumentar la capacidad volumétrica, se convierte en 9.5 lt contra 6.2 lt del componente estándar (+ 53%).
La entrada de aire (Snorkel) se coloca en la parte delantera para poder aspirar una mayor cantidad de aire y con menos turbulencia que la posición adoptada en el origen (en la parte posterior).
Su forma también se diseñó utilizando el cálculo FEM (Método del elemento finito) para minimizar las pérdidas de carga y, por lo tanto, aumentar el rendimiento en el rango completo de RPM.
El kit también incluye una cubierta de carbono que se monta cerca de la entrada de aire para evitar la succión del aire caliente.
Todo esto se refleja principalmente en un aumento del rendimiento del motor, como se muestra a continuación en el gráfico Dyno.
Mayor potencia máxima (+3 hp *)
Mejor respuesta del acelerador
Mayor máx. RPM (+ 500 rpm)
Un “sonido” de GP

Se recomiendan los xicles # 310 – # 320 , Motor estándar
Al estar utilizando Carbon, tendrá una reducción de peso de alrededor del 50% (465 gramos en comparación con los 970 gramos de OEM).

El filtro es lavable y ofrece un mejor rendimiento que el original
Tenga en cuenta que los colectores de goma de la caja de aire no están incluidos,tiene que utilizar  los originales.

 

Descripción

Carbon race airbox MK2, Aprilia RS250 (apr-10079)

Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.

And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( + 53%).

The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)

Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.

The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.

All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.

Greater maximum power (+3 hp *)

Better throttle response

Higher max. RPM (+ 500 rpm)

A GP “sound”

Improved access for maintenance

Jets #310 – #320(*)

Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).

The filter is washable and gives better performance then original

* Standard engine