The TYGA Moto Maggot stainless silencer, with 50.8 mm inside diamter, is definitely not for the fainthearted. The music emitted at full volume is simply ear drum shattering and would not be out of place in the MotoGP paddock.

We’ve used our two stroke pipe manufacturing technology to bring you this all stainless construction of hand rolled and hand welded cones. The 2″ baffle core is also stainless. The silencer is then packed with glass before final welding.

The ‘slip-on’ mount is 2″ internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2″ (approx. 50mm) external diameter tail pipe.

«The Maggot» is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.

Two extra (stainless) spring hooks are supplied with the kit, which can then be welded to any other system that may need modification to fit the silencer.

Please be aware that this silencer is exceptionally loud! It will, however, get you noticed wherever you go!

The overall length is approx. 320 mm. and fits onto a 2″ pipe section. The clamping area is 4″ in diameter. Contains an inner baffle tube and some sound deadening material but is still very loud; this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system will definitely NOT comply to specific country noise emission regulations and is NOT homologated for street use. You have been warned!

For use with pipe set EXPS-0012 or any system using a spring mounted 2″ inlet.

Click here for PDF

Silencer, Stainless/Carbpn End Cap, Round, 2″ x 380 mm., Assy.

This silencer has polished stainless steel endcaps and a hairline finish stainless tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is designed to fit any system with a 2″ external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.