Carbon exhauststay left, Suzuki RGV 250

36,15

Soporte de silencioso de carbono para RGV250. Este producto se utiliza para asegurar el silenciador del lado izquierdo para sistemas tipo SIDE BY SIDE. Se puede usar con o sin el soporte del reposapiés del pasajero, por lo que es adecuado para motos de calle y de carreras

Carbon exhauststay right, Suzuki RGV 250

36,15

Soporte de silencioso de carbono para RGV250. Este producto se utiliza para asegurar el silenciador del lado derecho para todo sistemas tipo de escape TYGA. Se puede usar con o sin el soporte del reposapiés del pasajero, por lo que es adecuado para motos de calle y de carreras

Clamp/manifold, NSR150/250

29,11

This is a replacement part for Tyga chambers. When ordering chambers, this item is included in the price and you do not need to order this parts separately.

Compatible with the following TYGA systems:

EXCS-0002

EXCS-0003

EXCS-0005

EXCS-0006

collar manifold for Exhaust, RGV250 / RS250

54,58

Los tubos de escape Tyga Performance Aprilia y RGV250 ahora se suministran con un doble anillo de junta tórica para un sellado superior. Además, las juntas toricas están hechos de Viton, que son resistentes a los fluidos automotrices y son más capaces de soportar temperaturas más altas.

 

Collar/manifold Special , NSR250

75,48

This is a special replacement part for the NSR250. The manifold has a CNC machined profile, matching the exhaust port exit to allow smooth exhaust gas transition from the cylinder into the expansion chamber. This helps to increase performance from as little as 7,000rpm all the way up to and beyond peak power.

Stephen A’lee of George White Superbikes in the UK independently dyno tested the manifolds on a stock engine MC21, with Stock airbox. The only mods were TYGA pipes.

The red trace shows the above bike using the supplied EXMN-0003 manifold with a peak of 57.2hp.

The blue trace shows the same bike with EXMN-9003 special manifolds fitted. A gain of 1.4hp with no jetting changes.

Compatible with the following TYGA system:

EXCS-0003

EXCS-0005

EXCS-0006

DB-killer for stainless exhaust 49mm

34,57

Decibel Killer, Silencer, Stainless, 2 Inch

This decibel killer is designed to reduce the noise from TYGA exhausts with 2 inch tail pipes. Suitable for the following models:

EXSL-0017 SUS Oval

EXSL-0040 Silencer, Aluminium, Round, 2″ x 380 mm.

EXSL-0047 Silencer, Aluminium, Round, 2″ x 450 mm.

It will also physically fit the following silencers, but it should not be used with any carbon silencer due to extreme heat buildup. If you like the designs below and would like the DB killer then please request that the silencer be made with stainless steel sleeve instead of carbon. We will advise on price (Stainles version of silencers below inclusive of db killer included will be less expensive than the carbon version excluding the db killer)

EXSL-0012

EXSL-0016

EXSL-0022

EXSL-0023

Exhaust hanger stay left, Aprilia RS250

79,36

Soporte de escape de aluminio mecanizado CNC de alta calidad para la Aprilia RS-250. Se utiliza para sujetar el silenciador del lado izquierdo cuando se instala un sistema de escape SIDE BY SIDE , sujetando este soporte al soporte de la estribera del pasajero del lado izquierdo. La estribera del pasajero del lado izquierdo se puede quitar si es necesario

Compatible con los siguientes sistemas de escape TYGA:

EXCS-0007

EXCS-0016

Mostrando 1–12 de 46 resultados